61
Parameters
localfile: Name of the local file to be uploaded.
remotefile: File name used after a file is uploaded and saved on the FTP server.
Description
Use the put command to upload a file on the client to the remote FTP server.
If no name is assigned to the file to be saved on the FTP server, the name of the source
file is used by default. After a file is uploaded, it is saved under the user’s authorized
directory, which can be set with the authorization-attribute command.
Examples
Upload source file cc.txt to the remote FTP server and save it as dd.txt.
[ftp] put cc.txt dd.txt
227 Entering Passive Mode (192,168,1,50,17,169).
125 ASCII mode data connection already open, transfer starting for /dd.txt.
226 Transfer complete.
FTP: 9 byte(s) sent in 0.112 second(s), 80.00 byte(s)/sec.
pwd
Syntax
pwd
View
FTP client view
Default Level
3: Manage level
Parameters
None
Description
Use the pwd command to display the currently accessed directory on the remote FTP
server.
Examples
Display the currently accessed directory on the remote FTP server.
[ftp] cd servertemp
[ftp] pwd
257 "/servertemp" is current directory.
The above information indicates that the servertemp folder under the root directory of
the remote FTP server is being accessed by the user.
To Next Page
Loading...
Need help?
General
