H3C WX Series User Manual

149
undo job job-name
View
System view
Default Level
3: Manage level
Parameters
job-name: Specifies name of the scheduled task, a string of 1 to 32 characters.
Description
Use the job command to create a scheduled task and enter job view, or enter this view
directly if a task is ready.
Use the undo job command to remove the task.
By default, no scheduled task is created.
After creating a scheduled task, you can configure the task in job view. For example,
you can specify the execution time for the commands in the task.
This command can be repeatedly executed to create multiple independent
scheduled tasks.
Related commands: view and time.
Examples
Create a scheduled task or enter scheduled task saveconfiguration.
<Sysname> system-view
[Sysname] job saveconfiguration
[Sysname-job-saveconfiguration]
license append
Syntax
license append license-key activation-key
View
System view
Default Level
2: System level
Parameters
license-key: License verification key of the AC.
activation-key: License activation key of the AC.

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English