H3C WX Series User Manual

124
<Sysname> system-view
[Sysname] configuration encrypt public-key
configuration replace file
Syntax
configuration replace file filename
View
System view
Default Level
3: Manage level
Parameters
filename: Specifies the name of the replacement configuration file for configuration
rollback.
Description
Use the configuration replace file command to set configuration rollback.
After the execution of this command, the current running configuration rolls back to the
configuration state based on the specified configuration file (filename).
Examples
Roll back from the current running configuration to a previous configuration state
based on a saved configuration file my_archive_1.cfg.
<Sysname> system-view
[Sysname] configuration replace file my_archive_1.cfg
Info: Now replacing the current configuration. Please wait...
Info: Succeeded in replacing current configuration with the file
my_archive_1.cfg.
display archive configuration
Syntax
display archive configuration
View
Any view
Default Level
1: Monitor level

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English