H3C WX Series User Manual

81
Parameters
None
Description
Use the display history-command command to view the valid history commands that
have been executed recently.
Currently, the system can display up to 256 history commands.
Related commands: history-command max-size.
Examples
Display history commands.
<Sysname> display history-command
system-view
quit
display current-configuration
display user-interface
Syntax
display user-interface [ num1 | { aux | console | vty } num2 ] [ summary ]
View
Any view
Default Level
1: Monitor level
Parameters
num1: Absolute number of a user interface, typically starting from 0.
num2: Relative number of a user interface, in the following rules:
 For the AUX port, the value is 0.
 For the console port, the value is 0.
 For VTY user interfaces, the value ranges from 0 to 4.
summary: Displays summary about user interfaces.
Description
Use the display user-interface command to view information about the specified or all
user interfaces.
 If the summary keyword is absent, the command displays the type of the user
interface, the absolute or relative number, the speed, the user privilege level, the

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English