H3C WX Series User Manual

175
Password:
Welcome to shell(header shell)
<Sysname>
quick configuration
Syntax
quick configuration
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the quick configuration command to enable the quick configuration function.
This command implements the function of a configuration guide, to guide you to
configure the basic parameters one by one in the way of prompt information.
NOTE:
The content of quick configuration depends on the AC model.
Examples
Perform quick configuration.
<Sysname> system-view
[Sysname] quick configuration
This operation will change the current configuration. Continue? [Y/N]: n
super
Syntax
super [ level ]

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English