H3C WX Series User Manual

128
Default Level
1: Monitor level
Parameters
None
Description
Use the display startup command to display the configuration file used at the current
system startup and the configuration file(s) to be used at the next system startup, and
also the enabled/disabled status of the Boot ROM access control function if the
function is supported on the device.
Related commands: startup saved-configuration.
Examples
Display the startup configuration file used at the current system startup and the one to
be used at the next system startup.
<Sysname> display startup
Current startup saved-configuration file: flash:/testcfg.cfg
Next startup saved-configuration file: flash:/testcfg.cfg
Table 9 display startup command output description
Field
Description
Current Startup saved-configuration file
The configuration file used for the current
startup
Next startup saved-configuration file
The configuration file used for the next startup
reset saved-configuration
Syntax
reset saved-configuration
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset saved-configuration command to delete the startup configuration file
saved on the storage medium of the device.

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English