H3C WX Series User Manual

195
[Sysname] patch install flash:
Patches will be installed. Continue? [Y/N]:y
Do you want to run patches after reboot? [Y/N]:y
Installing patches…
Installation completed, and patches will continue to run after reboot.
[Sysname]
patch load
Syntax
patch load
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the patch load command to load the patch file on the storage medium (such as
the flash or the CF card) to the memory patch area.
If the device is mounted with multiple storage media, the system loads the patch file
from the flash by default. If the system cannot find the patch file on the flash, it will try to
load the patch file from the CF card.
Before using the command, save the patch file to the root directory of the storage
medium
Examples
Load the patch file.
<Sysname> system-view
[Sysname] patch load
patch location
Syntax
patch location patch-location
View
System view

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English