H3C WX Series User Manual

43
Default Level
3: Manage level
Parameters
None
Description
Use the binary command to set the file transfer mode to binary (also called flow
mode).
By default, the transfer mode is ASCII mode.
Related commands: ascii.
Examples
Set the file transfer mode to binary.
[ftp] binary
200 Type set to I.
bye
Syntax
bye
View
FTP client view
Default Level
3: Manage level
Parameters
None
Description
Use the bye command to disconnect from the remote FTP server and return to user
view. If the AC establishes no connection with the remote FTP server, you will return to
user view directly.
Related commands: close, disconnect, and quit.
Examples
Terminate the connection with the remote FTP server and return to user view.
[ftp]bye
---> QUIT
221 Service closing control connection

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English