H3C WX Series User Manual

118
7 Configuration file management
commands
archive configuration
Syntax
archive configuration
View
User view
Default Level
3: Manage level
Parameters
None
Description
Use the archive configuration command to save the current running configuration
manually.
After the execution of this command, the system saves the current running
configuration with the specified filename (filename prefix + serial number) to the
specified path.
Before executing the archive configuration command, configure the filename prefix
and path of the saved configuration file by using the archive configuration location
command.
Examples
Save the current running configuration manually.
<Sysname> archive configuration
Warning: Save the running configuration to an archive file. Continue? [Y/N]: Y
Info: The archive configuration file myarchive_1.cfg is saved.
archive configuration interval
Syntax
archive configuration interval minutes

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English