H3C WX Series User Manual

27
[Sysname] user-group abc
[Sysname-ugroup-abc] authorization-attribute vlan 3
display telnet client configuration
Syntax
display telnet client configuration
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display telnet client configuration command to view information about the
current Telnet client.
At present, the command displays the configuration information of the source IP
address or source interface of the Telnet client.
Examples
Display the current configuration information of the Telnet client.
<Sysname> display telnet client configuration
The source IP address is 1.1.1.1.
header
Syntax
header { incoming | legal | login | motd | shell } text
undo header { incoming | legal | login | motd | shell }
View
System view
Default Level
2: System level
Parameters
incoming: Sets the banner displayed when a Modem login user enters user view. The
access controller does not support Modem login.
legal: Sets the authorization banner.

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English