H3C WX Series User Manual

46
Parameters
None
Description
Use the close command to terminate the connection to the FTP server, but remain in
FTP client view.
This command is equal to the disconnect command.
Examples
Terminate the connection to the FTP server and remain in FTP client view.
[ftp] close
221 Server closing control connection
[ftp]
debugging
Syntax
debugging
undo debugging
View
FTP client view
Default Level
3: Manage level
Parameters
None
Description
Use the debugging command to enable FTP client debugging.
Use the undo debugging command to disable FTP client debugging.
By default, FTP client debugging is disabled.
Examples
The AC serves as the FTP client. Enable FTP client debugging and use the active mode
to download file sample.file from the current directory of the FTP server.
<Sysname> terminal monitor
<Sysname> terminal debugging
<Sysname> ftp 192.168.1.46
Trying 192.168.1.46 ...
Press CTRL+K to abort

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English