H3C WX Series User Manual

47
Connected to 192.168.1.46.
220 FTP service ready.
User(192.168.1.46:(none)):ftp
331 Password required for ftp.
Password:
230 User logged in.
[ftp]undo passive
FTP: passive is off
[ftp] debugging
FTP: debugging switch is on
[ftp] get sample.file
---> PORT 192,168,1,44,4,21
200 Port command okay.
The parsed reply is 200
---> RETR sample.file
150 Opening ASCII mode data connection for /sample.file.
The parsed reply is 150
FTPC: File transfer started with the signal light turned on.
FTPC: File transfer completed with the signal light turned off.
.226 Transfer complete.
FTP: 3304 byte(s) received in 4.889 second(s), 675.00 byte(s)/sec.
[ftp]
Table 3 debugging command output description
Field
Description
---> PORT
Give an FTP order, with data port numbers
being…
The parsed reply is
The received reply code, which is defined in
RFC 959.
---> RETR
Download the file
FTPC: File transfer started with the signal
light turned on.
File transfer starts, and the signal light is
turned on.
FTPC: File transfer completed with the signal
light turned off.
File transfer is completed, and the signal
light is turned off.

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English