H3C WX Series User Manual

135
To execute the bootrom command successfully, you must first save the Boot ROM
program under the root directory of the storage medium.
If the keywords all and part are not specified, all contents of the Boot ROM program
are operated.
Examples
Use the a.btm file to upgrade the Boot ROM program of the AC.
<Sysname> bootrom update file a.btm
This command will update bootrom file, Continue? [Y/N]:y
Updating BootRom, please wait...
Updating basic bootrom!
................................
Update basic bootrom success!
Updating extended bootrom!
........................
Update extended bootrom success!
Update bootrom success!
display boot-loader
Syntax
display boot-loader
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display boot-loader command to display information of the boot file.
Related commands: boot-loader.
Examples
Display the file adopted for the current and next boot of the AC
<Sysname> display boot-loader
The boot file used this time:flash:/main.bin attribute: main
The boot file used next time:flash:/main.bin attribute: main
Failed to get the backup boot file used next time!
Failed to get the secure boot file used next time!

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English