H3C WX Series User Manual

127
The configurations are displayed in the order of global, port, and user interface. The
More prompt indicates that there are more line that the screen can display. Press Enter
to display the next line. Press Space to display the next screen. Press Ctrl+C or any other
key to exit the display.
Example 2:
Display the contents of the configuration file saved for the next startup of the device
with a number identifying each line.
<Sysname> display saved-configuration by-linenum
1: #
2: version 5.20, 0000
3: #
4: sysname Sysname
5: #
6: configure-user count 6
7: #
8: domain default enable system
9: #
10: ipv6 icmpv6 multicast-echo-reply enable
11: #
12: ipv6 fib-loadbalance-type hash-based
13: #
14: ipv6 fibcache
15: #
16: telnet server enable
17: #
18: loopback-detection enable
19: #
20: vlan 1
21: #
22: vlan 100
23: #
---- More ----
The More prompt shows that there are more line that the screen can display. Press Enter
to display the next line. Press Space to display the next screen. Press Ctrl+C or any other
key to exit the display.
display startup
Syntax
display startup
View
Any view

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English