H3C WX Series

125
Parameters
None
Description
Use the display archive configuration command to display the information about
configuration rollback.
Examples
Display the information about configuration rollback.
<Sysname> display archive configuration
Location: flash:/archive
Filename prefix: my_archive
Archive interval in minutes: 120
Maximum number of archive files: 10
Saved archive files:
No. TimeStamp FileName
1 Aug 05 2007 20:24:54 my_archive_1.cfg
2 Aug 05 2007 20:34:54 my_archive_2.cfg
# 3 Aug 05 2007 20:44:54 my_archive_3.cfg
„#‟ indicates the most recent archive file.
Next archive file to be saved: my_archive_4.cfg
Table 8 display archive configuration command output description
Field
Description
Location
Absolute path of the saved configuration files
Archive interval in minutes
Configuration file saving interval, in minutes.
If the automatic saving is disabled, this field is not
displayed.
display saved-configuration
Syntax
display saved-configuration [ by-linenum ]
View
Any view
Default Level
2: System level
Parameters
by-linenum: Identifies each line of displayed information with a line number.