H3C WX Series User Manual

93
hello abc
<Sysname>
A user logging in through VTY 0 wants to restart the device. To inform the other users to
take corresponding actions (for example, save the current configuration), the system
sends the message “Note please, I will reboot the system!”.
 Configuration on VTY 0
<Sysname> send vty 1
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
Note please, I will reboot the system in 3 minutes!^Z
Send message? [Y/N]:y
// The message saying that the system will reboot in 3 minutes is sent to VTY 1.
 If a user logs in from VTY 1, the following message is received on VTY 1 (VTY 1
received a message from VTY 0 when the interface loopback command is being
input in this example.).
[Sysname] interface loo
***
***
***Message from vty0 to vty1
***
Note please, I will reboot the system in 3 minutes!
set authentication password
Syntax
set authentication password { cipher | simple } password
undo set authentication password
View
User interface view
Default Level
3: Manage level
Parameters
cipher: Cipher text password.
simple: Plain text password.

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English