H3C WX Series

151
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
Example 2:
Reboot the AC after the current configuration changes..
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
This command will reboot the device. Current configuration will be lost in
next startup if you continue. Continue? [Y/N]:y
Now rebooting, please wait...
reset unused porttag
Syntax
reset unused porttag
View
User view
Default Level
1: Monitor level
Parameters
None
Description
Use the reset unused porttag command to clear the 16-bit index saved but not used in
the current system.
A confirmation is required when you carry out this command. If you fail to make a
confirmation within 30 seconds or enter “N” to cancel the operation, the command will
not be carried out.
Examples
Clear the 16-bit index saved but not used in the current system.
<Sysname> reset unused porttag
Current operation will delete all unused port tag(s). Continue? [Y/N]:y
<Sysname>