H3C WX Series User Manual

150
Description
Use the license append command to add a license to a specified AC.
NOTE:
 After adding the license successfully, you must reboot the AC to make the license effective.
 Support for this command depends on your AC model.
Examples
Add a license to the AC with the license key of F2DED8FB42C662571820, and the
activation key of CD59D7CD04AF48D89404.
<Sysname> system-view
[Sysname] license append F2DED8FB42C662571820 CD59D7CD04AF48D89404
reboot
Syntax
reboot
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reboot command to reboot the AC.
CAUTION:
 AC reboot may result in the interruption of the ongoing services. Be sure to use these
commands.
 If a main boot file fails or does not exist, the AC cannot be rebooted with this command. In
this case, you can re-specify a main boot file to reboot the AC, or you can power off the AC,
then power it on and the system automatically uses the backup boot file to restart the AC.
 If you are performing file operations when the AC is to be rebooted, the system does not
execute the command for the sake of security.
Examples
Example 1:
If the current configuration does not change, reboot the AC.

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English