H3C WX Series User Manual

11
1 CLI commands
command-alias enable
Syntax
command-alias enable
undo command-alias enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the command-alias enable command to enable the command alias function.
Use the undo command-alias enable command to disable the command alias
function.
By default, the command alias function is disabled, which means command aliases
cannot be configured.
Examples
Example 1:
Enable the command alias function.
<Sysname> system-view
[Sysname] command-alias enable
Example 2:
Disable the command alias function.
<Sysname> system-view
[Sysname] undo command-alias enable
command-alias mapping
Syntax
command-alias mapping cmdkey alias

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English