H3C WX Series User Manual

126
Description
Use the display saved-configuration command to display the contents of the
configuration file saved for the next startup of the device.
During device management and maintenance, you can use this command to check
whether important configurations are saved to the configuration file to be used for the
next startup of the device.
If the system is not specified with a configuration file for the next startup or the specified
configuration file does not exist, no information is displayed when you execute the
display saved-configuration command.
Related commands: save and reset saved-configuration (in File Management in the
Fundamentals Command Reference); display current-configuration (in Basic System
Configuration in the Fundamentals Command Reference).
Examples
Example 1:
Display the configuration file saved for the next startup of the device.
<Sysname> display saved-configuration
#
version 5.20, 0000
#
sysname sysname
#
configure-user count 6
#
domain default enable system
#
ipv6 icmpv6 multicast-echo-reply enable
#
ipv6 fib-loadbalance-type hash-based
#
ipv6 fibcache
#
telnet server enable
#
loopback-detection enable
#
vlan 1
#
vlan 100
#
---- More ----

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English