H3C WX Series User Manual

29
authentication is required, the legal banner displays right after the legal banner
before the login authentication.
 If password authentication or scheme authentication is required, the login banner
at authentication configured with the header login command displays after the
login banner before the login authentication.
 The banner configured with the header shell command displays right after the user
session is established.
Examples
Example 1:
Configure banners.
<Sysname> system-view
[Sysname] header incoming %
Input banner text, and quit with the character '%'.
Welcome to incoming(header incoming)%
[Sysname] header legal %
Input banner text, and quit with the character '%'.
Welcome to legal (header legal)%
[Sysname] header login %
Input banner text, and quit with the character '%'.
Welcome to login(header login)%
[Sysname] header motd %
Input banner text, and quit with the character '%'.
Welcome to motd(header motd)%
[Sysname] header shell %
Input banner text, and quit with the character '%'.
Welcome to shell(header shell)%
NOTE:
 In this example, % acts as the beginning/end character of the text. After the text is displayed,
enter the % character to end the text and quit the header command. The character % is the
starting/ending character of text in this example. Entering % after the displayed text quits the
header command.
 As the beginning/end character, the % character does not act as part of the welcome
information. As the starting and ending character, % is not a part of a banner.
Example 2:
Test the configuration remotely using Telnet. (The login banner can be displayed only
when login authentication is configured).
****************************************************************************
* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English