H3C WX Series User Manual

73
Default Level
3: Manage level
Parameters
tftp-ipv6-server: IPv6 address or host name (a string of 1 to 46 characters) of a TFTP
server.
-i interface-type interface-number: Specifies the egress interface by its type and
number. This parameter can be used only in case that the TFTP server address is a link
local address and the specified egress interface must have a link local address (For the
configuration of link local address, see IPv6 Basics in the Layer 3 – IP Services
Configuration Guide).
get: Downloads a file.
put: Uploads a file.
source-filename: Source filename.
destination-filename: Destination filename. If not specified, this filename is the same as
the source filename.
Description
Use the tftp ipv6 command to download a specified file from a TFTP server or upload a
specified local file to a TFTP server.
This command applies to IPv6 networks.
Examples
Download filetoget.txt from the TFTP server.
<Sysname> tftp ipv6 fe80::250:daff:fe91:e058 -i ethernet 1/1 get filetoget.txt
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait....
TFTP: 411100 bytes received in 2 second(s)
File downloaded successfully.

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English