Chapter 7 Device Configuring Using EMS Multiplex & Decoding Outputs
© 2012 Harmonic Inc. 103 ProView 7000 v.2.6, Rev. E
7.3.1.5 Multiplex Output Unreferenced PIDs Management
The Unreferenced PIDs branch in the Multiplex & Decoding Output box displays all the PIDs
related to the multiplex output that are not referenced by a specific program or table.
NOTE: The properties of the output unreferenced PIDs in the multiplex output stream is detailed in
7.3.7 Output Unreferenced PID Properties.
7.3.1.6 Decoding Channel Management
Click the Decoding Channel branch in the Multiplex & Decoding Output box to display all the
information related to the input program routed to the decoding channel.
To Next Page
Loading...
