Harmonic ProView 7100 - Launching EMS; Adding a Device

Chapter 6 Remote Management using EMS Launching EMS
© 2012 Harmonic Inc. 65 ProView 7000 v.2.6, Rev. E
To check the ProView 7000™ EMS Java version:
aRun
cmd in Windows.
bEnter
Java -version and press Enter to check which version is currently on your
station. Update if necessary from the Java Web start page.
2. Click Launch ProView 7000 EMS on the ProView 7000™ web page to install the EMS.
The EMS application installs. Shortcuts are added to the desktop and the start
menu.
6.4 Launching EMS
Prerequisites:
The device IP address must be configured using the ProView 7000™ front panel, see
6.1 Configuring the IP Parameters.
To launch the ProView 7000™ EMS:
❖ Double-click the Harmonic ProView 7000™ EMS launch icon to launch EMS.
The EMS GUI displays.
6.5 Adding a Device
To add a device:
1. Click Add Device on the EMS toolbar
—or—
select Administration > Add ProView 7000.
Figure 6–1: Add Device dialog
The EMS displays the Add ProView 7000™ Device dialog.
2. Enter a name for the new ProView 7000™ device.
3. Enter the IP Address of the new ProView 7000™ device.