Harmonic ProView 7100 - Decoding Channel Properties Monitoring

Chapter 8 Monitoring using EMS Decoding Channel Properties Monitoring
© 2012 Harmonic Inc. 174 ProView 7000 v.2.6, Rev. E
8.7 Decoding Channel Properties Monitoring
To display the decoding channel properties monitoring tab:
1. Right-click a decoding channel in the Multiplex & Decoding Output box, see Figure 6–2 for
the box location.
2. Select the Monitoring tab.
The Monitoring tab comprises:
■ General
❑ Transport Error Indicator Counter
❑ Input FIFO Overflow
❑ Scrambled
❑ Corrupted
❑ PCR Discount
❑ PCR Glitch
■ Card
❑ Temperature
❑ Voltage
❑ Up Time
❑ Resets
■ Video
❑ Overflow
❑ Underflow
❑ Stream
❑ Sync
❑ Skip
❑ Repeat
❑ Decoding Status
❑ Stream ID
❑ VBV Buffer Size
❑ Profile & Level
❑ Calculated Bitrate
❑ Calculated Bit Buffer Level
■ Audio 1/2
❑ Overflow
❑ Underflow
❑ Stream
❑ Sync
❑ Skip