Harmonic ProView 7100 - Decoding Channel Properties Status

Chapter 8 Monitoring using EMS Decoding Channel Properties Status
© 2012 Harmonic Inc. 172 ProView 7000 v.2.6, Rev. E
8.6 Decoding Channel Properties Status
To display the decoding channel properties status tab:
1. Right-click a decoding channel in the Multiplex & Decoding Output box, see Figure 6–2 for
the box location.
2. Select the Status tab.
The Status tab comprises:
■ Error Counters – displays the count of the following errors detected and enables the user
to reset the status counters:
❑ Continuity Counter Errors
❑ Subtitle Repositioning Failures
■ Video – displays the status of the following video source parameters:
❑ Codec
❑ Aspect ratio
❑ Resolution
❑ Scan type
❑ Frame rate (per second)
❑ Sequence header bitrate (in bps)
❑ GOP size and structure
■ VBI – displays extracted VBI data information
■ Audio 1 / 2 – displays the status of the following audio 1 (or audio 2) source parameters:
❑ Codec
❑ Sample rate (in kHz)
❑ audio channel mode
❑ Audio bitrate (in bps)
❑ Layer number
■ Service – displays the PID of the following decoded elementary streams:
❑ Video
❑ PCR
❑ Audio 1 and 2
❑ VBI
❑ Subtitling