EasyManua.ls Logo

Harmonic ProView 7100 - Multi-Transport Stream Descrambler

Harmonic ProView 7100
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Introduction ProView 7000™ Platform Main Features and Configurations
© 2012 Harmonic Inc. 13 ProView 7000 v.2.6, Rev. E
MPE decapsulation for offline data delivery
7
Re-multiplexing capabilities with up to four multiplexes
8
The ProView 7000™ can generate up to four (4) TS outputs from one (1) TS input
Re-generation of DVB and MPEG PSI/SI
Low Delay decoding mode
EMS graphical user interface providing easy drag-and-drop management
SNMP monitoring
Closed caption (CEA-608 and CEA-708) re-insertion into VANC in SD/HD-SDI output
On screen display of DVB subtitles in SD and HD resolutions
Automatic service selection of the first service in the PAT
Genlock
DSR support
7
(requires a Harmonic ProStream 1000)
The ProView 7000™ platform is offered in two different application oriented configurations:
Multi-Transport Stream Descrambler
Multi-Format Decoder
1.3.1 Multi-Transport Stream Descrambler
The ProView 7000™ Multi-Transport Stream Descrambler is an ideal and cost effective
receiver solution for digital headend turn around applications.
The platform’s DVB-S/S2
10
, ASI and IP inputs, along with powerful descrambling and
multiplexing capabilities, fully addresses the headend reception application requirements.
The basic configuration includes:
1 x ASI input
2 x GbE outputs with virtual IP on the output stream
2 x ASI outputs (4 x ASI outputs on ProView 7100™)
Re-multiplexing capabilities with up to four multiplex outputs
9
Regeneration of DVB and MPEG or PSI/SI
Highly accurate PCR re-stamping
Conditional access:
Full transport stream descrambling
10
Multi-program BISS descrambling – The ProView 7000 can descramble up to 12
programs / 24 PIDs.
2 or 4 x DVB-CI slots
CA methods: Multicrypt, Simulcrypt
CAS (partial list): Viaccess®, Irdeto®, Conax®, Nagravision®
8. A license is required for more than one multiplex. When using IP In, the multiplex limit is 2.
9. A license is required for more than one multiplex.
10. Requires a license with some hardware configurations, see B.6 Front End Card Features for details.

Table of Contents

Related product manuals