Harmonic ProView 7100 - VBI;VANC Configuration

Chapter 4 Device Configuring Using the Front Panel Configuring the Decoding
© 2012 Harmonic Inc. 45 ProView 7000 v.2.6, Rev. E
■ SDI Groups – Audio 1 is always the first pair of channels in a group and Audio 2 is always
the second pair of channels in a group. Options:
❑ Group – There are four groups to choose from. The default is group 1.
❑ Pair – The pair cannot be changed.
4.2.5 VBI/VANC Configuration
The VBI/VANC menu enables you to insert VBI/VANC data into the decoded video. You can
insert several VANC datum items into the same line but you cannot insert several VBI items
into the same line and you cannot insert VBI and VANC into the same location.
Each type has a sub-menu to configure the video source and insertion location. The sub-
menus are:
■ AMOL (Automatic Measurement Of Line-Ups)
Source: VBI ES
■ CC (Closed Captions)
Source: Video ES
■ TVG (TV Guide)
Source: VBI ES
■ WSS (Wide Screen Signalling)
Sources:
❑ Decoder
❑ VBI ES
❑ Video ES
❑ WSS-AFD (when using AFD)
■ TTX (Teletext EBU)
Source: VBI ES
■ VPS (Video Program System)
Source: VBI ES
■ VITS (Vertical Interval Test Signals)
Source: Decoder
■ VITC (Vertical Interval Time Code)
Sources:
❑ Decoder
❑ VBI ES
❑ Video ES
■ VI/AFD (Video Index)
Sources:
❑ VBI ES
❑ Video ES
■ M422 (Monochrome 2:4:4)
Source: VBI ES