Harmonic ProView 7100 - Manipulating EMS GUI Components; Refreshing the EMS Screen

Chapter 6 Remote Management using EMS Manipulating EMS GUI Components
© 2012 Harmonic Inc. 70 ProView 7000 v.2.6, Rev. E
6.13 Manipulating EMS GUI Components
The EMS GUI displays the graphical information in boxes. These boxes can be collapsed when
not needed or expanded to fill all available screen space.
■ Use the triangles to expand or collapse boxes, see Figure 6–2.
■ Click and drag box borders to resize boxes, see Figure 6–2.
6.14 Refreshing the EMS Screen
The EMS supports a user-driven screen refresh function. This function can refresh the
following:
■ Element – Updates a branch or specific element in the stream, either at the multiplexed
input or the multiplexed output.
■ Device – Updates the currently managed ProView 7000™ device.
To refresh an element or device:
1. Select an element or device.
2. Select File>Refresh>[device|element]
—or—
click Refresh on the EMS Toolbar.
You can also perform a refresh by right-clicking the element icon and selecting the Refresh
item in the displayed element drop-down menu.