Harmonic ProView 7100 - Decoding Channel Properties; Related Topics

Chapter 7 Device Configuring Using EMS Multiplex & Decoding Outputs
© 2012 Harmonic Inc. 112 ProView 7000 v.2.6, Rev. E
7.3.8 Decoding Channel Properties
To configure the decoding channel properties:
❖ Right-click a decoding channel in the Multiplex & Decoding Output box, see Figure 6–2 for
the box location.
Related Topics:
■ Service Parameters Tab
■ Video Parameters Tab
■ PCR Parameters Tab
■ Audio 1/2 Parameters Tab
■ VBI/VANC Tab
■ OSD Parameters Tab
■ DPI To GPI Parameters Tab