Chapter 7 Device Configuring Using EMS Device Management
© 2012 Harmonic Inc. 151 ProView 7000 v.2.6, Rev. E
7.10.8.2 Restoring a Backed-Up Configuration
To restore a backed-up configuration:
1. Select the device in the Devices box.
2. Select Tools > Backup/Restore Configuration… in the ProView 7000™ EMS menu bar.
The Backup and Restore Configuration dialog displays, see Figure 7–36.
3. Browse the path and select the saved configuration name in the Restore Device section of
the dialog.
4. Click Restore.
After confirming the retrieval, the EMS retrieves the configuration file and the
ProView 7000™ is reconfigured according to the saved set-up.
7.10.8.3 Restoring the Default Configuration
You can choose to restore the default configuration or to restore the factory default database
which also resets the IP addresses to their defaults and removes all licenses.
To restore the default device configuration:
1. Select the device in the Devices box.
2. Select Tools > Backup/Restore Configuration in the ProView 7000™ EMS menu bar.
The Backup and Restore Configuration dialog displays, see Figure 7–36.
3. Click Default.
The Restore Default Configuration dialog displays.
4. Choose one of the following:
❑ Restore default configuration to device (default database)
❑ Restore factory default configuration (default database & IP)
5. Click Restore Default Configuration.
To Next Page
Loading...
