Harmonic ProView 7100 - Page 42

Chapter 4 Device Configuring Using the Front Panel Configuring the Decoding
© 2012 Harmonic Inc. 42 ProView 7000 v.2.6, Rev. E
• Full Screen
❑ 16:9 Aspect ratio
•Center-cut
• Pillarbox (Side-bars)
• Full Screen
•AFD
■ Aspect ratio – selects the aspect ratio.
Options:
•4:3
• 16:9
4.2.2.3 Digital Output Sub-Menu:
The Digital Output sub-menu is provided when the video display format is set to High
Definition (HD).
The screen provides access for setting-up the following parameters:
■ Video Format – selects the video format.
Options: 720p@50, 720p@59, 720p@60, 1080i@50, 1080i@59, 1080i@60.
■ Aspect ratio Conversion – selects the aspect ratio conversion.
Options: Center-cut, Pillarbox (Side-bars), Full Screen.
4.2.2.4 Composite Monitor Output Sub-Menu:
The Composite Monitor sub-menu controls the parameters of the analog (CV) video stream
provided for monitoring the HD video stream on the output program.
The screen provides access for setting-up the following parameters:
■ Video Format – selects the video format.
Options:
❑ NTSC
❑ PAL-B/G, -I, -D, -M, -N
❑ French SECAM
■ Aspect Ratio Conversion – selects the aspect ratio conversion. These options change when
you change the aspect ratio.
Options:
❑ Center-cut
❑ Letterbox
❑ Full Screen
■ Aspect ratio – selects the aspect ratio.
Options:
❑ 4:3
❑ 16:9