Setting up 'Accounts with Access Control '
In the 'Accounts with Access Control' Mode, users must first enter a PIN code and then
select an Account. They can change accounts once they have logged in. The supervisor
can restrict accounts for each user.
If only one account is available, the Mailing System automatically
selects it at start up.
Implementing “account with access control”
1.
Select the 'Accounts with Access Control' mode : see How to Display and Change
the 'Account Mode' on page 97.
2.
Create the accounts you wish to implement: see How to Create an Account on page
100.
3.
Create the Operator PIN codes you wish to implement: see How to Create an
Operator on page 106.
As long as your structure is not complete, you may want to create
accounts and operators without activating them. Users can only
use activated accounts or operator PIN codes.
94
| Page 94 | feb-14-2014 12:06 |
5
Managing Accounts and Assigning Rights
To Next Page
Loading...
