Choosing a Type of Stamp3.1
Customizing Your Stamp
When processing mail you will be required to select the'Type of stamp ' you need. For
example, you can select “Standard” to print postage, or “Received” to print the date on
incoming mail, or “No printing” for seal only applications.
For each 'Type of stamp' you select, the Mailing System displays all the specifications -
and only those specifications - for the type of process you will use.
Home Screen and Configuration Menu
Each type of stamp is associated to:
•
A specific Home Screen that displays current stamp configuration (weight, postage...)
•
A specific Imprint Configuration Menu that allows you to set stamp parameters.
To directly gain access to the Configuration Menu of the Type of
stamp, press Shortcut Key on the Control Panel.
Your system has six Shortcut Keys for direct access to save time.
You can eliminate key strokes for rate selection, imprint memories,
label printing, add or check funds, weighing mode selection and to
customize the stamp.
Type of Process and Type of Stamp
The table below indicates the 'Type of stamp' to choose, depending on the type of process
you want to apply to each set of mail.
The column on the right indicates, for each Type of stamp, the options available for each
type of Stamp.
If you do not set any parameter, the Mailing System uses default values.
Available Stamp options'Type of stamp'Type of process
29
| Page 29 | | feb-14-2014 12:06 |
3
Processing Mail
To Next Page
Loading...
