Printing [Received] for Incom-
ing Mail
3.4
In this Section
This section describes how to use the [Received ] type of stamp, to:
•
Print the date on incoming mail, and/or
•
Print 'Received' on incoming mail.
See also
•
About the use of the Type of stamp, see Choosing a Type of Stamp on page 29 ).
Set-Up Requirements
The procedure below outlines steps required to stamp incoming mail.
You must begin with selecting the Type of stamp to gain access to the corresponding
parameters and be able to run mail.
Make sure you have completed the preparation steps mentioned
in Preparing and Starting your Work Session on page 31 .
How to Process Incoming Mail (Settings)
Required settings:
1. Make sure you are on the home screen of the [Received ] type of stamp.
The type of stamp is indicated at the top of the home screen as illustrated.
53
| Page 53 | | feb-14-2014 12:06 |
3
Processing Mail
To Next Page
Loading...
