Hasler IM440 PLUS - How to Activate; Deactivate an Operator; How to Delete an Operator

Activating Operators
The ability to select the status of an operator allows you to create as many operators as
you need in advance. Users cannot use deactivated operator PIN codes for new operators.
How to Activate / Deactivate an Operator
To activate or deactivate an Operator:
1. Perform procedure How to Modify an Existing Operator on page 108 .
2. In the operator options, select the line Status to activate or deactivate the operator
(the button displays the current status), and then press [OK] .
3. Once the Operator modification summary screen appears, press [OK] .
Deleting Operators
Follow the procedure below in order to delete an operators.
How to Delete an Operator
To delete an Operator:
1. Perform procedure How to Modify an Existing Operator on page 108 .
2. Select Delete (or type 2 ) instead of Edit / Modify .
The Delete confirmation screen is displayed.
3.
Press [OK] to delete the operator, otherwise press .
110
| Page 110 | feb-14-2014 12:06 |
5
Managing Accounts and Assigning Rights