Hasler IM440 PLUS - How to Access Diagnostic Data; How to Display Software Data

How to Access Diagnostic Data
To gain access to a diagnostic data:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 7.3 or select the path:
Maintenance Diagnostics
2. The system requires you press [OK] to start the diagnostic tests, then displays the
list of the tests.
3. Select a test from the list displayed on the screen.
System Data
As Supervisor, you have access to:
•
The Software Data (PSD#, Loader, OS, PACK, XNDF DATA DELTA, language,
variant).
•
The Hardware (system) Data (P/N of the base and the PSD).
•
The list of the events occurred in the machine (Base errors, PSD events and Server
connection history).
•
The data of the machine counters.
How to Display Software Data
To display Software Data:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 7.1.1 or select the path:
Maintenance System info Software information
2. The system software data appears on the screen.
11
Troubleshooting
231
| Page 231 | feb-14-2014 12:06 |