Hasler IM440 PLUS - Connecting to Online Services

Connecting to Online Services7.2
Automatic calls
Automatic calls
To fully benefit from the convenience and power of Online Services, your Mailing System
should permanently be connected to a network connection so that it can link to the Online
Server automatically whenever required.
For the usage of some services, some automatic calls are scheduled to upload
corresponding data.
For the Reports service, the Mailing System automatically connects at the end of each
month to upload accounting and postal category statistics.
For the eConfirmation service, your Mailing System automatically connects at night if you
have processed transactions with an eConfirmation service that day.
For the Ink Management service, the Mailing System automatically connects when it’s time
to re-order ink supplies.
It is strongly recommended that you leave the Mailing System turned
on, in sleep mode, and connected to a live analog telephone line
or network during the night, to allow the connection to the Online
Server to occur automatically.
Manual Calls
Manual calls allow you to connect to the Online Server in order to retrieve new information
(update postal rates, ad-dies/slogan or messages) or to enable features and options (weigh
platform capacity, number of accounts, differential weighing, etc.).
You will be instructed to use this function when rates change if you
do not have a rate protection agreement.
You can trigger a call to the Online Services server from the user menu as well as from the
supervisor menu.
132
| Page 132 | feb-14-2014 12:06 |
7
Online Services