You can also apply the optional setting(s):
1. Move the stamp away from the envelope edge for thick envelopes: see How to
Move the Stamp (Print Offset) on page 71 .
2. Close envelopes using the feeder sealer : see Using the Sealing Function on page
73 .
You are now ready to print.
To set the stamp quickly, consider using imprint memories . The
memories store stamp characteristics together with rates and, if
activated, charged account. See Using Imprint Memories on page
72 .
Running Mail
The way you will handle mail mainly depends on the weighing method you have chosen.
The weighing method is indicated by the icon in the Weighing Type zone of the screen. .
If you need to change the current account before applying postage
(on account-enabled configurations), see How to Change Accounts
on page 59 .
How to Apply Standard Postage (Running Mail)
In mode Standard Weighing ( )
From the [Standard ] home screen, to print postage directly on mail pieces:
1. Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.
2.
Press . The system motors start running.
If the Smart Start function is activated, the motors start automatically
when you withdraw the mail piece from the weighing platform. To
enable Smart Start, see How to Activate / Deactivate Smart Start
on page 159.
3
Processing Mail
45
| Page 45 | feb-14-2014 12:06 |
To Next Page
Loading...
