Hasler IM440 PLUS - Postage Imprint Default Settings

Postage Imprint Default Set-
tings
8.9
The settings of the postage imprint 'by default' include:
•
Stamp default settings : sets the default rate, text and ad die for mailing operations
•
Automatic Date Advance : enables early date change to continue printing postage
with the new date after post office closing hours
•
Fractional mode : enables entering fractional postage values manually
•
Printing offset : sets the default offset print position from the right side of the
envelope.
Stamp Default Settings
You can set default parameters for the stamp elements that follow:
•
Rate
•
Text
•
Ad Die
You can create up to nine custom text messages.
On list screens, a mark indicates the default parameter.
Changing the Default Rate
Use the procedure below to change the rate the machine activates at start-up.
169
| Page 169 | | feb-14-2014 12:06 |
8
Configuring your Mailing System