How to Change System Time-Outs
To change the system time-Outs:
1. As Supervisor (see How to Log in as Supervisor on page 148 )
Press and type 3.5 or select the path:
Default user settings System settings Time-out settings
The Timeout setting screen is displayed.
2. Select each field and specify the length of each the time-out.
Use the [C] key to clear old settings then enter a new value.
3. Press [OK] to validate.
158
| Page 158 | feb-14-2014 12:06 |
8
Configuring your Mailing System
To Next Page
Loading...
