Enabling/Disabling Sounds8.4
You can enable or disable the system beeps separately:
•
Beeps on keys
•
Beeps on warnings and errors.
How to Enable / Disable the Beeps
To enable or disable the beeps:
1. As a user:
Press and type 11.2 or select the path:
Preferences Sounds
2. Select Beep on key and/or beep on error check boxes.
3. Press [OK] to validate.
This is a user setting that only lasts as long as you are logged in.
Setting Default System Beeps
You can set the default beep state for user sessions.
152
| Page 152 | feb-14-2014 12:06 |
8
Configuring your Mailing System
To Next Page
Loading...
