Hasler IM440 PLUS - How to Create an Imprint Memory; How to Edit; Modify an Imprint Memory

How to Create an Imprint Memory
To create an imprint memory:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 4 or select the path:
Predefined imprint management
The current list of imprint memories is displayed in the Imprint memories screen.
2. Select a line named None in the list.
3. Press [OK] to create a new imprint memory.
4. Enter the name of the new imprint memory, then press [OK] .
5. Enter the preferences, press [OK] to validate and display the next list of parameters,
if any.
6. Repeat the previous step until the system displays the name of the new imprint memory
in the list.
7. You can modify any preference by using the Edit/Del function (see How to Edit /
Modify an Imprint Memory on page 175 )
How to Edit / Modify an Imprint Memory
To edit or modify an imprint memory:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 4 or select the path:
Predefined imprint management
2. Select an imprint memory from the list displayed on the screen.
3. Press [OK] to validate.
4. Select the menu path Edit (or type 1 )
The Imprint memory modification screen is displayed.
5. Use the arrows to select the preferences, then press [OK] to modify the parameters.
6.
Press to exit.
8
Configuring your Mailing System
175
| Page 175 | feb-14-2014 12:06 |