How to Use the Feeder
Feeding a stack of mail pieces:
1. Fan the envelopes to separate them.
2. Bevel the edge of the stack.
3. Place the envelopes in the hopper, their upper edge resting against the rear guide.
Ensure that all the envelopes are stacked along the rear guide, from largest to smallest.
4. Adjust the side guide for large envelopes. To adjust the guide, push it gently to rest
against the envelopes, without pressing.
Envelopes flaps must be closed, not nested.
Do not try to seal self-adhesive envelopes.
3
Processing Mail
39
| Page 39 | feb-14-2014 12:06 |
To Next Page
Loading...
