Managing Operators5.6
In Account with Access control Mode and as supervisor, you can create up to 50
'operators' that each correspond to a PIN code (see Accounting and Assigning Rights
Overview on page 87).
This section only applies to the Account with Access Control Mode
(see Accounting and Assigning Rights Overview on page 87)
If you use a postal expense software, you can only manage the
operator PINs from the PC.
Operator Options
The following options must be specified when creating operators.
DescriptionFormatOption
Operator PIN code. Two Operators cannot
have the same PIN code.
4 digitPIN code
Operator name. Two Operators cannot have
the same name.
20 alphanumeric
characters
Name
Users can only log in using active Operator's
PIN codes.
Active/InactiveStatus
Accounts that the Operator may use.List of accounts
Only active accounts are displayed on the User screens.
105
| Page 105 | | feb-14-2014 12:06 |
5
Managing Accounts and Assigning Rights
To Next Page
Loading...
