How to Modify an Existing Operator
To modify an existing Operator:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 5.3 or select the path:
Account management Manage operators
The Manage Operator Wizard window opens.
2. Select Operator List .
3. Select the operator and select Edit / Del. .
4. Select Edit / Modify (or type 1 ).
The Edit / Modify screen is displayed.
5. Change the operator options as needed and press [OK] to display the Operator
modification summary screen (Use key [C] to clear characters).
6. Press [OK] to accept your changes.
108
| Page 108 | feb-14-2014 12:06 |
5
Managing Accounts and Assigning Rights
To Next Page
Loading...
