Hasler IM440 PLUS - How to Align the Print Heads

Setting the Headset Alignment
Aligning the print heads is required if there is an between the top and the bottom of the
imprints.
Your Mailing System requires the heads to be aligned after each
cartridge change.
How to Align the Print Heads
To align the print heads:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 7.2.4 or select the path:
Maintenance Ink Cartridge Headset alignment
2. Press [OK] and put a piece of paper in the mail transport.
The system prints a test pattern.
206
| Page 206 | feb-14-2014 12:06 |
10
Maintaining your Mailing System