Hasler IM440 PLUS - How to Set the Default Printing Offset; How to Activate; Deactivate Fractional Postage Values

Printing Offset
The printing offset is the distance between the right edge of the envelope and the imprint.
You can increase the disance to 1”.
How to Set the Default Printing Offset
To change the default printing offset:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 3.2.3 or select the path:
Default user settings System settings Print
2. Set the Default from a position list.
3. Press [OK] to validate.
Fractional Setting
The fractional setting enables users to type fractional values when entering postage
manually. Otherwise, the fractional value is always zero.
How to Activate / Deactivate Fractional Postage Values
To activate / deactivate fractional postage:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 3.3.5 or select the path:
Default user settings Default imprint parameters Fractional
Postage Mode
2. Select Enable / Disable fractional to activate or deactivate the fractional postage.
8
Configuring your Mailing System
173
| Page 173 | feb-14-2014 12:06 |