Settings Overview8.1
This section describes two types of settings that are available on your system:
•
User settings , that only last as long as the user who applies them is logged in
•
Supervisor settings , sets the default or permanent settings of your Mailing System.
Other user settings are described in the corresponding sections:
Processing Mail on page 27 , Maintaining your Mailing System on
page 201 , etc.
User Settings
The user settings described in the sections below are:
•
Setting the display language
•
Adjusting the screen contrast
•
Enabling/disabling key beeps and warning/error beeps.
Supervisor Settings
Your Mailing System has one supervisor PIN code that allows you to configure the default
settings and perform other functions such as managing accounts and access rights,
generating certain reports, etc.
The Supervisor PIN code of the system has been provided to your
organization in a separate distribution.
The supervisor settings allow you to:
•
Change the default user settings
•
Modify system time-outs
•
Set funds warnings (high amount, low funds) and activate a funding PIN code
•
Define a default weighing method for mailing, and calibrate the weighing devices
•
Design a default imprint (rate, text, ad die), activate the Automatic Date Advance
function and set a default printing offset
•
Activate sealing mode as default setting
•
Enter connection parameters.
147
| Page 147 | | feb-14-2014 12:06 |
8
Configuring your Mailing System
To Next Page
Loading...
