Hasler IM440 PLUS - Weighing Settings; How to Change the Default Weighing Type

Weighing Settings8.8
The weighing settings include:
•
Setting a default weighing type used for mailing
•
Activating/ De-activating the WP Automatic Selection functionality.
•
Zeroing the weigh platform
•
Checking on Zero Weight
•
Setting the GEO code that corresponds to the geographical location of the Mailing
System.
Default Weighing Type
How to Change the Default Weighing Type
This setting defines both the weighing device and the weighing type that are selected by
default when a user starts the mailing process (see Choosing a Weighing Type on page
63 ).
To change the default weighing type:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 3.2.4 or select the path:
Default user settings Base settings Default weighing type
2. Select a default weighing type in the list.
If Manual Weight Entry is selected as default weighing type, the
system will ask you to set a default weight.
3. Press [OK] to validate.
162
| Page 162 | feb-14-2014 12:06 |
8
Configuring your Mailing System